Been at it again. This is a project that has been in the works for some time and is finally reality. You can read about it here. . .
http://jbhphoto.com/blog/2016/07/02/leds-vc-printing
8X10 LED VC ENLARGER HEAD PROJECT
8X10 LED VC ENLARGER HEAD PROJECT
Cool and Good Luck. I noticed your name on the front plate. As they say. You name it, you own it!
Stephen Prunier Photography
8X10 LED VC ENLARGER HEAD PROJECT
SPPhoto wrote: Cool and Good Luck. I noticed your name on the front plate. As they say. You name it, you own it!
Thanks! The head works like a champ. Yep, my name is on there. . . also comes with an Oklahoma Guarantee, "if it breaks, you own both pieces!"
Thanks! The head works like a champ. Yep, my name is on there. . . also comes with an Oklahoma Guarantee, "if it breaks, you own both pieces!"
8X10 LED VC ENLARGER HEAD PROJECT
JB Harlin wrote: [quote=SPPhoto]Cool and Good Luck. I noticed your name on the front plate. As they say. You name it, you own it!
Thanks! The head works like a champ. Yep, my name is on there. . . also comes with an Oklahoma Guarantee, "if it breaks, you own both pieces!"
Are you anywhere near Holliday, TX? I have family there, and my uncle goes to OKC quite a bit.
Thanks! The head works like a champ. Yep, my name is on there. . . also comes with an Oklahoma Guarantee, "if it breaks, you own both pieces!"
Are you anywhere near Holliday, TX? I have family there, and my uncle goes to OKC quite a bit.
Stephen Prunier Photography
8X10 LED VC ENLARGER HEAD PROJECT
SPPhoto wrote: Are you anywhere near Holliday, TX? I have family there, and my uncle goes to OKC quite a bit.
That is up near Wichita Falls. . . I am in the Ft. Worth area. . .
That is up near Wichita Falls. . . I am in the Ft. Worth area. . .
-
- Posts: 37
- Joined: Wed Feb 24, 2016 8:45 pm
Re: 8X10 LED VC ENLARGER HEAD PROJECT
This is insane! You really took it into your own hands to create things that work for you.
I'm also trying to fashion a similar one out of a spolt 45A head. I'm still stuck though: I havent figured out how to wire the timer into the setup.
From what i've figured out:
- if the timer connects to the 110V-in of the DC-power supply, there is significant delay from the moment 110V-in (from timer) is off till the LED actually goes off (for me it's abt 2-3s), which is bad
So I guess you somehow connect the timer to the Buckdrive V+ & V-. but these are 12V (or 24V depending on the LED used). I went through your instruction pdf times & times again without being able to find the clue on the wiring arrangement. Please kindly enlighten me. Thanks
I'm also trying to fashion a similar one out of a spolt 45A head. I'm still stuck though: I havent figured out how to wire the timer into the setup.
From what i've figured out:
- if the timer connects to the 110V-in of the DC-power supply, there is significant delay from the moment 110V-in (from timer) is off till the LED actually goes off (for me it's abt 2-3s), which is bad
So I guess you somehow connect the timer to the Buckdrive V+ & V-. but these are 12V (or 24V depending on the LED used). I went through your instruction pdf times & times again without being able to find the clue on the wiring arrangement. Please kindly enlighten me. Thanks